- FOS 2ft white hanging profile LED light
- Wattages: 18W / 24W
- Luminous efficacy: ≥100 lm/W
- Minimum output: ≥1800 / ≥2400 lumens
- SMD 2835 LED technology
- 6500K / 4000K / 2700K light options
- 600mm length; 50 × 70mm cross-section
- white powder-coated die-cast aluminium; PC diffuser
- Two adjustable steel suspension cables, approx. 1.25m each
- Complete ceiling and profile mounting kit included
- Internal HPF driver, PF >0.98; AC 90–265V; CRI >75
- Two-year manufacturing-defect warranty with exclusions
Description
FOS 2ft white Hanging Profile LED Light
The FOS 2ft white hanging profile LED light provides clean linear illumination for contemporary indoor spaces. Its 600mm die-cast aluminium profile has a white powder-coated finish and a continuous polycarbonate diffuser. Available in 18W and 24W, this suspended fitting lets you select the appropriate wattage and white-light colour while keeping the same architectural design.
Lighting Options and Colour Temperature
Both options offer luminous efficacy of ≥100 lm/W, providing corresponding minimum outputs of ≥1800 lumens (18W) and ≥2400 lumens (24W). Choose Cool White 6500K for a crisp lighting atmosphere, Neutral White 4000K for balanced everyday illumination or Warm White 2700K for a softer visual character. The three colour options are available for either wattage, making it simple to select a combination for the room.
The SMD 2835 LEDs sit behind a polycarbonate diffuser, creating a continuous visible lighting surface. Rather than dominating the ceiling, the linear profile can complement modern furniture, counters and architectural details. Consistent light colour across several fixtures can create a more unified interior arrangement.
Aluminium Profile and Driver
The fixture measures 600mm in length with a 50 × 70mm profile cross-section. Its die-cast aluminium housing and white powder-coated exterior give the suspended unit a defined geometric form. The fitting includes an internal high-power-factor LED driver, accepts AC 90–265V input and has power factor >0.98. Its colour rendering index is CRI >75. The separate electrical supply lead does not form part of the mechanical suspension.
Applications and Design Ideas
The 2ft design is suitable for compact desks, kitchens, retail counters, personal workspaces, studios and welcoming reception areas. Over a desk or working counter, the fixture introduces a distinct line of light; above a reception surface, it reinforces the geometry of the space. In retail and hospitality interiors, it can be positioned to complement a display counter, service point or selected seating area.
The shorter profile suits compact areas and can be repeated along a counter or arranged in groups where individual shorter fittings better suit the layout. The white finish blends comfortably with pale ceilings and minimal interiors. Choose spacing, height and wattage to suit the planned layout and nearby lighting.
For a coordinated commercial scheme, consider how the fixture relates to the furniture below, sightlines through the space and the position of other ceiling lights. Work areas may benefit from an arrangement of several evenly aligned profiles. In residential interiors, a carefully positioned suspended fixture can introduce a subtle architectural feature while illuminating a kitchen, dining or home-office area.
Installation and Adjustable Suspension System
Each light includes a two-point adjustable steel-wire suspension kit with two separate cables, approximately 1.25m each, sliding threaded studs, profile-side cable cylinders, ceiling holders, spring-loaded gripper inserts, screws and wall plugs. The approximately 1.25m measurement describes the supplied cable lengths.
1. Attach to the profile. Open the small retaining piece at the end of the rear profile channel. Slide in the two square-base threaded studs and position them along the slot. Pass the stopped end of each steel cable through its small internally threaded cylinder, then screw that cylinder onto its profile stud. Confirm both fittings are secure.

2. Fix the ceiling-side assemblies. Mark two points aligned with the profile attachments and secure the cylindrical ceiling holders using fixings suitable for the ceiling structure. Each holder has an upper screw fixing, a separate side exit for spare suspension cable and a lower opening for the threaded cable gripper. Feed the free end of each cable through its spring-release gripper and holder, routing surplus cable through the side opening.

3. Set the hanging height. Keep the fixture supported during adjustment. Press each gripper’s spring-loaded release pin to slide its cable, then release the pin to lock the cable. Adjust both suspension points until the profile is level. Check that both grippers hold securely before transferring the weight of the fitting onto the cables.

The attached electrical lead exits the aluminium profile separately from the two steel suspension cables. A qualified electrician should isolate the electrical supply and make the connection in accordance with the fitting’s wiring arrangement. The electrical lead must not carry the weight of the light. Confirm that the mounting points and anchors are suitable for the supporting structure.
Technical Specifications
- Rated wattages: 18W and 24W; efficacy ≥100 lm/W
- Minimum corresponding output: ≥1800 / ≥2400 lumens
- SMD 2835 LEDs; Cool White 6500K, Neutral White 4000K, Warm White 2700K
- 600mm long; 50 × 70mm aluminium profile with PC diffuser
- Internal HPF driver, PF >0.98; AC 90–265V; CRI >75
Included Components and Warranty
Includes the FOS 2ft white hanging profile LED light and complete two-point suspension set: two steel cables, two sliding studs, two threaded profile cylinders, two ceiling holders, two spring-release inserts, two screws and two wall plugs. The LED driver is internal.
Warranty: Two years against manufacturing defects, subject to the standard exclusions including physical damage, improper use and burn-outs.
Additional information
| Dimensions | N/A |
|---|---|
| Wattage | 18W, 24W |
| Light Color | Cool White 6500k, Neutral White 4000k, Warm White 2700k |
| Luminous Efficacy | ≥100 lm/W |
| Calculated Minimum Flux - 18W | ≥1,800 lumens |
| Calculated Minimum Flux - 24W | ≥2,400 lumens |
| LED Technology | SMD 2835 |
| Profile Length | 600mm |
| Profile Cross-Section | 50 × 70mm |
| Housing Material | Die-cast aluminium |
| Diffuser | Polycarbonate (PC) |
| Finish | White powder-coated |
| Installation | Suspended / Hanging |
| Suspension Accessory | Hanging wire set included |
| CRI | >75 |
| Input Voltage | AC 90–265V |
| LED Driver | Internal high-power-factor LED driver |
| Power Factor | >0.98 |
| Warranty | 2 years against manufacturing defects, subject to standard exclusions |






















There are no reviews yet.