FOS 36W 4ft IP65 Tri-Proof LED Tube Light

Description

FOS 36W 4ft IP65 Tri-Proof LED Tube Light

The FOS 36W tri-proof LED tube light combines practical general illumination with a manufacturer-supported IP65 design for suitable covered commercial workspaces and industrial interiors. Rated at 36W with a luminous flux of at least 3,600 lumens, this fitting features a white plastic housing and a nominal 4ft (1,200mm) linear format. It is an option for service corridors, utility areas and indoor workshops where protection against dust and water jets is relevant to the lighting plan.

Manufacturer model TL-4F-TRIPROOF36-IP65 identifies the product as an IP65 tri-proof LED tube light. Three fixed white-light colour options allow the appearance of the illumination to be chosen for the space.

IP65 Tri-Proof Protection

The defining feature of this waterproof LED tube light is its manufacturer-stated IP65 classification. IP65 indicates dust-tight protection and resistance to water jets under defined test conditions. It does not indicate suitability for immersion or pressure washing.

This level of ingress protection is useful when considering lighting for suitable indoor working areas where dust or occasional water exposure may affect fixture selection. The protective performance of the completed installation also depends on correct mounting and electrical connections. Follow the manufacturer’s installation instructions when working around cable entries and the building supply.

The tri-proof classification distinguishes this product from standard indoor tube lights. It supports selection for appropriate sheltered work environments without assuming that every exposed or unusually demanding location is suitable.

36W General Illumination and 2835 LEDs

With 36W rated power and ≥3,600 lumens, the fitting offers general illumination in a straightforward linear format. The 2835 LED technology and specified CRI greater than 75 complement its performance for everyday indoor lighting.

In workshops and utility rooms, position general lighting around occupied work areas and normal circulation routes. In corridors, a coordinated arrangement of tubes can follow the route through the building. Ceiling height, wall finishes and nearby equipment influence how the light reaches benches and floors, so the layout should reflect the actual space.

White Housing and 4ft Format

The tube has a white plastic housing with a clean, functional appearance suited to service areas, covered commercial premises and practical work interiors. The nominal 4ft (1,200mm) length supports an orderly arrangement along walls or ceilings where linear fittings are appropriate.

Its restrained appearance makes it easy to coordinate with utility-space finishes and other building services. The choice of fitting positions should account for work areas, available supporting surfaces and safe access during maintenance.

Three Fixed White-Light Colours

Select from Cool White 6500K, Neutral White 4000K and Warm White 2700K. Cool White produces a cooler white appearance often preferred for task-oriented workspaces. Neutral White offers a balanced tone for multipurpose commercial and service areas. Warm White creates a warmer atmosphere for occupied interiors where that visual character is preferred.

Each purchase variation provides one fixed colour temperature. Choose the required version when ordering, and use matching colours across neighbouring fixtures where a consistent appearance is important. Existing illumination and the activities in each room can guide the selection.

Suitable Indoor Commercial and Industrial Applications

The FOS 36W tri-proof tube can be considered for covered commercial workspaces, indoor workshops, building utility areas, service corridors and suitable industrial support rooms. In a workshop, coordinate fittings with benches, shelves and access routes. Utility spaces may benefit from an uncluttered linear layout that leaves room for routine inspection of other equipment. In a service corridor, repeat fittings along the main route to support general visibility.

Where water exposure or operating conditions are more demanding, confirm the proposed installation against the manufacturer’s instructions. The location and connections must be appropriate for the intended environment.

Integrated Driver and Electrical Performance

An internal high-power-factor LED driver supports AC 90–265V operation with a specified power factor greater than 0.98. A qualified electrician should assess the available supply and complete all connections safely.

Isolate the power before installation, inspection or maintenance. Electrical wiring and connection arrangements should follow the manufacturer’s instructions so the intended protection of the fitting is maintained.

Wall and Ceiling Installation

The product is specified for wall or ceiling mounting. Select a suitable supporting surface, plan the position of the electrical feed and use fixings appropriate for the structure. The installer should secure the fitting correctly, route cables without strain and preserve the intended ingress protection at the electrical connections.

For repeated installations, maintain a consistent alignment and keep sufficient clearance from nearby equipment. Plan access for future inspection and cleaning.

Care and Maintenance

Inspect the housing, mounting and visible wiring periodically. With power isolated, gently remove ordinary dust using a soft, dry cloth, avoiding abrasive cleaners. Any damage affecting the housing or electrical connections should be assessed by a qualified technician before the fitting is returned to normal use.

Technical Specifications

• Brand: FOS
• SKU: FOSLTL-TP36W
• Manufacturer model: TL-4F-TRIPROOF36-IP65
• Product type: IP65 tri-proof LED tube light
• Rated power: 36W
• Luminous flux: ≥3,600 lumens
• LED technology: 2835
• Housing: White plastic
• Nominal length: 4ft / 1,200mm
• Ingress protection: Manufacturer-stated IP65
• Installation: Wall or ceiling
• Input voltage: AC 90–265V
• Driver: Internal high-power-factor LED driver
• Power factor: >0.98
• CRI: >75
• Light colour options: Cool White 6500K; Neutral White 4000K; Warm White 2700K

Warranty

The FOS 36W tri-proof LED tube light carries a 2-year warranty against manufacturing defects, subject to standard exclusions including physical damage, improper installation, misuse and applicable burn-out exclusions. Retain proof of purchase and product details for warranty enquiries.